产品详情
查看大图

  • 产品名称：德国PTL密度测试漏斗装置

  • 产品型号：V32.02
  • 产品厂商：德国PTL
  • 产品价格：1000
  • 折扣价格：900
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
德国PTL密度测试漏斗装置 ISO60密度测试装置 德国PTL密度测试漏斗装置 ISO60密度测试装置用以确定由粉末或颗粒组成的成型材料可以从一个指定的漏斗倒入的表观密度； 符合标准：ISO 60 : 1977, EN ISO 60 : 1999-05, DIN EN ISO 60 : 2000-01
详情介绍：
进口密度测试装置，流动性和松装密度测量仪，密度测试漏斗装置

德国PTL密度测试漏斗装置 ISO60密度测试装置供应进口V32.02密度测试漏斗装置
 
PTL密度测试漏斗装置用以确定由粉末或颗粒组成的成型材料可以从一个指定的漏斗倒入的表观密度
符合标准：ISO 60 : 1977, EN ISO 60 : 1999-05, DIN EN ISO 60 : 2000-01
 
 
 
Standard Outfit:
1    funnel, inner 56 mm with taper to Φ33 mm, capacity approx. 200 ml, inside surface highly polished,
1    drop bottom, with handle,
1    stand including base plate, with adjustable holder        for the funnel,
1    measuring cylinder, inner diameter 45±5 mm, capacity 100±0,5 ml, inside surface highly polished,
3    spikes for a reliable electrically conductive connection between the measuring cylinder and the base plate,
1    bar with straight edges, for wiping.
 
Design: funnel, measuring cylinder, stand rod and drop bottom of corrosion resisting chromium-nickel steel, base plate and funnel holder of anodized aluminum,
                                                    Article No.: V 32.02
 
The apparent density is determined to check manufactured and delivered moulding material. Knowledge of this density is a precondition for the calculation of loading chamber volumes of processing machines as well as of containers for storage and transport.
The apparent density is the ratio of mass and occupied volume. According to nature, the volume and thus the density considerably depend on the manner of pouring. For this reason the testing method was standardized; the PTL Density Test Funnel Device exactly complies to the relevant standards. In addition to the Density Test Funnel Device a precision balance is needed for determination of the mass.
PTL Density Test Funnel Devices have an electrically conductive connection between the funnel and the measuring cylinder to ensure potential equalization in case of electrostatic charges.
A Density Test Funnel Device can only be used for moulding material that can be poured from a specified funnel, i. e. powdery, granular or several short-fiber moulding materials. For long-fiber and shred-like moulding material, the apparent density is to determine in accordance with ((DIN) EN) ISO 61.
Information about such an Apparent Density Test Device V 33:         on request
姓名：
电话：
Email：
您的需求：